Service
High Level Dusting
Removal of accumulated dust from rafters, beams, ceilings, and hard-to-reach structural surfaces up to 75 ft — ground-based technology first, powered access when conditions require it.
Removal of accumulated dust from rafters, beams, ceilings, and hard-to-reach structural surfaces up to 75 ft — ground-based technology first, powered access when conditions require it.
High level dusting is the removal of accumulated dust, debris and residue from structural surfaces above standard reach — rafters, ceiling joists, steel beams, mezzanine framing, and overhead fixtures. In most commercial and industrial facilities, this dust builds up unseen for months or years, settling on horizontal surfaces rarely disturbed by normal housekeeping.
Left unaddressed, accumulated dust affects air quality, can obscure fire suppression and detection equipment, and — where the dust is combustible — introduces a fuel source at height. High Level Dusting combines ground-based high-reach equipment with powered access, so nearly every facility can be fully addressed without unnecessary risk.
Open-web steel joists, roof decking, and structural framing where dust settles undisturbed.
Structural beams, mezzanine framing, and elevated platforms.
Exposed pipe runs, conduit, and cable tray at height.
High-mounted lighting and fixture housings.
Upper racking levels and structural supports in distribution facilities.
Metal deck, insulation surfaces, and ceiling systems.
Camera-assisted visual assessment from the ground to scope accumulation and access needs.
Confirm access method, equipment and safety requirements for the specific structure.
Ground-based high-reach systems first; powered access where height or geometry requires it.
Visual inspection of completed surfaces via camera-mounted equipment.
Before-and-after imagery provided for your facility records.
We use carbon fiber pole systems paired with industrial vacuum units for ground-based work up to approximately 40 ft where conditions permit, and powered access equipment — operated by licensed personnel — for work up to approximately 75 ft. [PLACEHOLDER – confirm specific SkyVac/pole/vacuum models to publish exact specifications.]
See Our Technology
Using ground-based carbon fiber pole systems, we can typically reach up to approximately 40 ft where facility conditions and structure allow. Beyond that, or where geometry requires it, we use powered access equipment operated by licensed personnel, reaching up to approximately 75 ft.
Work is planned around your operating hours and includes controlled work zones to minimize disruption. Scheduling is confirmed during the site assessment.
Camera-mounted equipment lets our team visually inspect completed surfaces from the ground, and we provide before-and-after documentation for your records.
Not necessarily. General high level dusting addresses accumulated dust and debris at height. Combustible dust cleaning follows additional considerations specific to combustible materials — see our Combustible Dust Centre for detail.
Book a site assessment and we'll recommend the right approach for your ceilings, rafters and structural surfaces.
